What do kidney tubules secrete

Urine formation occurs during three processes:. During filtration, blood enters the afferent arteriole and flows into the glomerulus where filterable blood components, such as water and nitrogenous waste, will move towards the inside of the glomerulus, and nonfilterable components, such as cells and serum albumins, will exit via the efferent arteriole.

These filterable components accumulate in the glomerulus to form the glomerular filtrate. The next step is reabsorption , during which molecules and ions will be reabsorbed into the circulatory system. In the collecting duct, secretion will occur before the fluid leaves the ureter in the form of urine. The end product of all these processes is urine, which is essentially a collection of substances that has not been reabsorbed during glomerular filtration or tubular reabsorbtion.

Urine is mainly composed of water that has not been reabsorbed, which is the way in which the body lowers blood volume, by increasing the amount of water that becomes urine instead of becoming reabsorbed.

The other main component of urine is urea, a highly soluble molecule composed of ammonia and carbon dioxide, and provides a way for nitrogen found in ammonia to be removed from the body. Urine also contains many salts and other waste components. Red blood cells and sugar are not normally found in urine but may indicate glomerulus injury and diabetes mellitus respectively. Normal kidney physiology : This illustration demonstrates the normal kidney physiology, showing where some types of diuretics act, and what they do.

Glomerular filtration is the renal process whereby fluid in the blood is filtered across the capillaries of the glomerulus. Glomerular filtration is the first step in urine formation and constitutes the basic physiologic function of the kidneys. It describes the process of blood filtration in the kidney, in which fluid, ions, glucose, and waste products are removed from the glomerular capillaries.

Many of these materials are reabsorbed by the body as the fluid travels through the various parts of the nephron, but those that are not reabsorbed leave the body in the form of urine. Blood plasma enters the afferent arteriole and flows into the glomerulus, a cluster of intertwined capillaries. The visceral layer lies just beneath the thickened glomerular basement membrane and is made of podocytes that form small slits in which the fluid passes through into the nephron.

The size of the filtration slits restricts the passage of large molecules such as albumin and cells such as red blood cells and platelets that are the non-filterable components of blood. These then leave the glomerulus through the efferent arteriole, which becomes capillaries meant for kidney—oxygen exchange and reabsorption before becoming venous circulation.

The positively charged podocytes will impede the filtration of negatively charged particles as well such as albumins. The process by which glomerular filtration occurs is called renal ultrafiltration. The force of hydrostatic pressure in the glomerulus the force of pressure exerted from the pressure of the blood vessel itself is the driving force that pushes filtrate out of the capillaries and into the slits in the nephron.

Osmotic pressure the pulling force exerted by the albumins works against the greater force of hydrostatic pressure, and the difference between the two determines the effective pressure of the glomerulus that determines the force by which molecules are filtered.

These factors will influence the glomeruluar filtration rate, along with a few other factors. Regulation of GFR requires both a mechanism of detecting an inappropriate GFR as well as an effector mechanism that corrects it. List the conditions that can affect the glomerular filtration rate GFR in kidneys and the manner of its regulation. Glomerular filtration rate GFR is the measure that describes the total amount of filtrate formed by all the renal corpuscles in both kidneys per minute.

The glomerular filtration rate is directly proportional to the pressure gradient in the glomerulus, so changes in pressure will change GFR.

GFR is also an indicator of urine production, increased GFR will increase urine production, and vice versa. The filtration constant is based on the surface area of the glomerular capillaries, and the hydrostatic pressure is a pushing force exerted from the flow of a fluid itself; osmotic pressure is the pulling force exerted by proteins. Many factors can change GFR through changes in hydrostatic pressure, in terms of the flow of blood to the glomerulus. GFR is most sensitive to hydrostatic pressure changes within the glomerulus.

A notable body-wide example is blood volume. The increased blood volume with its higher blood pressure will go into the afferent arteriole and into the glomerulus, resulting in increased GFR. Conversely, those with low blood volume due to dehydration will have a decreased GFR. Pressure changes within the afferent and efferent arterioles that go into and out of the glomerulus itself will also impact GFR.

Vasodilation in the afferent arteriole and vasconstriction in the efferent arteriole will increase blood flow and hydrostatic pressure in the glomerulus and will increase GFR. Conversely, vasoconstriction in the afferent arteriole and vasodilation in the efferent arteriole will decrease GFR.

An example of this is a ureter obstruction to the flow of urine that gradually causes a fluid buildup within the nephrons. Osmotic pressure is the force exerted by proteins and works against filtration because the proteins draw water in. Increased osmotic pressure in the glomerulus is due to increased serum albumin in the bloodstream and decreases GFR, and vice versa.

GFR is the rate at which is this filtration occurs. GFR is one of the many ways in which homeostasis of blood volume and blood pressure may occur. In particular, low GFR is one of the variables that will activate the renin—angiotensin feedback system, a complex process that will increase blood volume, blood pressure, and GFR.

This system is also activated by low blood pressure itself, and sympathetic nervous stimulation, in addition to low GFR. Tubular reabsorption is the process by which solutes and water are removed from the tubular fluid and transported into the blood. The fluid filtered from blood, called filtrate, passes through the nephron, much of the filtrate and its contents are reabsorbed into the body.

Reabsorption is a finely tuned process that is altered to maintain homeostasis of blood volume, blood pressure, plasma osmolarity, and blood pH. Reabsorbed fluids, ions, and molecules are returned to the bloodstream through the peri-tubular capillaries, and are not excreted as urine. Tubular secretion : Diagram showing the basic physiologic mechanisms of the kidney and the three steps involved in urine formation.

Namely filtration, reabsorption, secretion, and excretion. Reabsorption in the nephron may be either a passive or active process, and the specific permeability of the each part of the nephron varies considerably in terms of the amount and type of substance reabsorbed. The mechanisms of reabsorption into the peri-tubular capillaries include:. These processes involve the substance passing though the luminal barrier and the basolateral membrane, two plasma membranes of the kidney epithelial cells, and into the peri-tubular capillaries on the other side.

Some substances can also pass through tiny spaces in between the renal epithelial cells, called tight junctions. As filtrate passes through the nephron, its osmolarity ion concentration changes as ions and water are reabsorbed.

Finally, in the distal convoluted tubule and collecting duct, a variable amount of ions and water are reabsorbed depending on hormonal stimulus. The final osmolarity of urine is therefore dependent on whether or not the final collecting tubules and ducts are permeable to water or not, which is regulated by homeostasis. Reabsorption throughout the nephron : A diagram of the nephron that shows the mechanisms of reabsorption.

The movement of these ions also helps to conserve sodium bicarbonate NaHCO 3. The typical pH of urine is about 6. Urine that is formed via the three processes of filtration, reabsorption, and secretion leaves the kidney through the ureter, and is stored in the bladder before being removed through the urethra.

At this final stage it is only approximately one percent of the originally filtered volume, consisting mostly of water with highly diluted amounts of urea, creatinine, and variable concentrations of ions. Learning Objectives Describe the purpose of tubular secretion in kidney physiology. Key Points The substance that remains in the collecting duct of the kidneys following reabsorption is better known as urine.

Secreted substances largely include hydrogen, creatinine, ions, and other types of waste products, such as drugs. Tubular secretion is the transfer of materials from peritubular capillaries to the renal tubular lumen and occurs mainly by active transport and passive diffusion. Urine leaves the kidney though the ureter following secretion. Key Terms collecting duct : A system of the kidneys that consists of a series of tubules and ducts that connect the nephrons to the ureter. Mechanisms of Secretion The mechanisms by which secretion occurs are similar to those of reabsorption, however these processes occur in the opposite direction.

Passive diffusion—the movement of molecules from the peritubular capillaries to the intersitial fluid within the nephron. Active transport—the movement of molecules via ATPase pumps that transport the substance through the renal epithelial cell into the lumen of the nephron. Following Secretion Urine that is formed via the three processes of filtration, reabsorption, and secretion leaves the kidney through the ureter, and is stored in the bladder before being removed through the urethra.

Authored by : Boundless. Provided by : Boundless. Provided by : Wikibooks.