How long shoe goo dry

Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours. For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping. Data Sheets. Product color. Country of usage. Language desired. Product Images. Related Products.

Check items to add to the cart or select all. Shoe GOO 1. Shoe GOO 3. Shoe GOO Shoe glue helps to revive broken footwear from heel to toe. How it works? Walk this way …. Leather shoes offer classic style, but repairing them requires the right glue.

Repairing broken shoes Even the best shoe occasionally breaks, rips, or tears. Easily fix flapping shoe soles with a powerful shoe glue once and for all.

To prepare: Make sure you have a clean surface, with no grease, dust or other contaminants. To get best results, you should roughen smooth surfaces — such as hard plastic or metal commonly found in leather work boots — with a fine grit sandpaper. Apply a thin layer of shoe repair glue adhesive to one surface. For example, if you want to fix a flapping sole, apply the shoe glue to the bottom half.

Now press the torn parts together. Make sure to do this quickly after applying the shoe adhesive for maximum effect. To confirm that the glued sides are held fast, we recommend using rubber bands, tape, or clamps. Once you are certain the surfaces are bonding, leave the material alone for 24 to 48 hours.

This is based on normal room temperature; at cooler temperatures or lower humidity, the process will take a little longer. Give banged-up shoes new life with shoe glue. Clamp the sections together and make sure they hold firm for 1 to 3 hours. Product Specs. Instructions for Safe Use. Surface should be clean, dry and free of dirt. Puncture seal in neck of tube using pointer cap.

Apply directly to surfaces to be protected, bonded or repaired. For waterproofing and protecting, use thin coats spread with a disposable tool to build a thick coating, allowing each layer to set hours. Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.

For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap. Clean uncured adhesive with acetone or citrus-based solvents.

Cured material may be removed by cutting or scraping. Data Sheets. Product color. Country of usage.